Live Lab Session - See the Multiplier Run in a Real Dental Lab

​George Wheeler, owner of Bridge Dental, walks you through his thermoforming setup - live, unscripted, with your questions answered.

Most lab owners hear about a new machine and get a spec sheet. this is the opposite.

​George wheeler runs bridge dental. He bought a Mayku Multiplier, put it on his bench, and now forms retainers, night guards, sports guards and bleaching trays on it every day. In this session he'll walk you through the machine live - from his lab, on his bench, with his materials.

​What you'll see:

• ​The full forming cycle - sheet in, appliance out, real time

• ​How George runs multiple templates per pull with the 7-shot adaptor plate

• ​The auto-levelling system and what it means for fit consistency

• ​How he sets up custom material profiles (open materials - use what you already stock)

• ​The numbers: what changed in his lab after switching from a single-pull vacuum former

​Who this is for:

​Lab owners and managers at dental labs doing thermoformed appliances - aligners, retainers, night guards, sports guards, bleaching trays. If you're outsourcing work you could be doing in-house, or your current former is a bottleneck, this session is worth 30 minutes.

​What happens after:

​You'll get the recording within 48 hours. If you want to see what the multiplier would save your specific lab, we'll send you a free custom ROI report built from your own numbers.

​Lab Host

​George Wheeler - Owner, Bridge Dental